Home | Resume | Publications | Contact
Hamid R. Salimi Jazi / Publications


Home
Resume
Publications
Contact
Links

Publications

 

Refereed Journal Papers and Book

  1. H. B. Parizi, H.R. Salimi Jazi, J. Mostaghimi, T. Coyle, V. Pershin, S. Chandra, A. McDonald, L. Rosenzweig, and C. Moreau, “Numerical Simulation of Droplet Impact on Patterned Surfaces”, Journal of Thermal Spray Technology, submitted Feb. 2007.
  2. H.R. Salimi Jazi, J. Mostaghimi, T. Coyle, S. Chandra, C.Y. Lau, L. Rosenzweig, E. Moran, “Measuring Substrate Temperature Variation During Application of Plasma Sprayed Zirconia Coatings”, Journal of Thermal Spray Technology, accepted April. 2007.
  3. H.R. Salimi Jazi, T. w. Coyle, M. Raessi, J. Mostaghimi, "Study of Solidification Behavior and Splat Morphology of Vacuum Plasma Sprayed Ti Alloy by Computational Modeling and Experimental observations”, Surface & Coating Technology, in press Jan. 2007.
  4. H.R. Salimi Jazi, J. Mostaghimi, T. Coyle, S. Chandra, C.Y. Lau, L. Rosenzweig, E. Moran, “Effect of Droplet Characteristics and Substrate Surface Topography on the Final Morphology of Plasma Sprayed Zirconia Single Splat”, Journal of Thermal Spray Technology,16(2), 2007.
  5. H.R. Salimi Jazi, J. Mostaghimi, T. Coyle, “Grain Growth and Pore Elimination in the VPSF Ti-6Al-4V Alloy", Metallurgical and Materials Transactions A, in press Oct. 2006.
  6. H.R. Salimi Jazi, J. Mostaghimi, T. Coyle, “Vacuum Plasma Spraying: A New Concept for Manufacturing Ti-6Al-4V Structures”, JOM, pp 50-56, Sept. 2006.
  7. H.R. Salimijazi, T.W. Coyle, J. Mostaghimi, and L. Leblanc, “Microstructure of Vacuum Plasma Sprayed Boron Carbide”, Journal of Thermal Spray Technology, 14(3), pp 362-368, Sept. 2005.
  8. H.R. Salimi Jazi, J. Mostaghimi, T. Coyle, and V. Pershin (Edts.), Conference Proceeding, 17th International Symposium on Plasma Chemistry, Aug. 2005, Toronto, Canada.
  9. H.R. Salimijazi, T.W. Coyle, J. Mostaghimi, and L. Leblanc, “Microstructure and Failure Mechanism in As-Deposited Vacuum Plasma Sprayed Ti-6Al-4V Alloy”, Journal of Thermal Spray Technology, 14(2), pp 215-223, June 2005.
  10. H.R. Salimijazi, “Diamond Coating and Films by HFCVD”, Iranian Society of Surface Science & Technology Journal, Vol. 7, May. 1999, Isfahan, Iran.
  11. H.R. Salimijazi, “Introduction to Diamond Coating and Films”, Iranian Society of Surface Science & Technology Journal, Vol. 6, Jan. 1999, Isfahan, Iran.

Refereed Conference Papers

  1. H.R. Salimi Jazi, J. Mostaghimi, T. Coyle, V. Pershin, L. Rosenzweig, and E. Moran, Y.C. Lau, “Temperature Evolution and Pore Distribution in Zirconia Footprint Deposits Using Atmospheric Plasma Spraying”, 18th International Symposium on Plasma Chemistry, August 2007, Kyoto, Japan.
  2. H. B. Parizi, H.R. Salimi Jazi, J. Mostaghimi, T. Coyle, V. Pershin, S. Chandra, A. McDonald, L. Rosenzweig, and C. Moreau, “Numerical Simulation of Droplet Impact on Patterned Surfaces”, 2007 International Thermal Spray Conference & Exposition, May 2007, Beijing, China.
  3. H.R. Salimi Jazi, J. Mostaghimi, T. Coyle, V. Pershin, L. Rosenzweig, and E. Moran, “Effect of Substrate Temperature and Droplet Characteristics on Plasma Sprayed Zirconia Splats”, 2006 International Thermal Spray Conference & Exposition, May 15-18, 2006, Seattle, Washington, USA.
  4. H.R. Salimijazi, M. Raessi, T.W. Coyle, and J. Mostaghimi, “Numerical Simulation and Experimental Evaluation of Solidification Behavior of Vacuum Plasma Sprayed Ti-6Al-4V Single Droplet”, 17th International Symposium on Plasma Chemistry, H. R. Salimijazi, J. Mostaghimi et al (Eds.), 7-12 Aug. 2005, Toronto, Canada.
  5. H.R. Salimijazi, F. Azarmi, T.W. Coyle, and J. Mostaghimi, “Study of the Relationship between the Young’s Modulus and Microstructure of Vacuum Plasma Sprayed Boron Carbide”, 29th International Conference on Advanced Ceramics and Composites, American Ceramic Society, pp. 235-244, Jan. 2005, Florida, USA.
  6. H.R. Salimijazi, T.W. Coyle, and J. Mostaghimi, “Relationship between Elastic Modulus and Microstructure in Vacuum Plasma Sprayed Structures”, 2005 International Thermal Spray Conference & Exposition, May 2005, Basel, Switzerland.
  7. H.R. Salimijazi, “Grain Growth and Pore Elimination in VPSF Ti-6Al-4V Alloy”, 10th Meeting of the Thermal Spray Consortium on Coating Formation, University of Toronto, 2004.
  8. H.R. Salimijazi, T.W. Coyle, J. Mostaghimi, and L. Leblanc, “Characterization of Vacuum Plasma Sprayed Boron Carbide”, Thermal Spray 2004: Advancing in Technology and Application, ITSC, May 2004, Osaka, Japan.
  9. H.R. Salimijazi, T.W. Coyle, J. Mostaghimi, and L. Leblanc, “Structure and Mechanical Properties of VPS Ti-6Al-4V”, International Symposium on Plasma Chemistry, ISPC 2003, Taormina, Italy.
  10. H.R. Salimijazi, T.W. Coyle, J. Mostaghimi, and L. Leblanc, “Near-Net Shape Forming of Ti-6Al-4V alloys by Vacuum Plasma Spray Forming”, Thermal Spray 2003: Advancing the Science and Applying the Technology, B.R. Marple and C. Moreau (Eds.), pp. 611-616, May 2003, Florida, USA.
  11. L. Leblanc, H.R. Salimijazi, J. Mostaghimi, and T.W. Coyle, “On Vacuum Plasma Spray Forming of Ti-6Al-4V”, Thermal Spray 2003: Advancing the Science and Applying the Technology, B.R. Marple and C. Moreau (Eds.), pp. 603-609, May 2003, Florida, USA.                                                                                                               
  12. H.R. Salimijazi and S. Nasrazadani, “Evaluation of Copper Electroplated Layers on Silicon Wafers”, American Electroplaters and Surface Finishers Society AESF, SUR/FIN”98, Jun. 1998, Minneapolis, USA.
  13. H.R. Salimijazi, “Computational Modeling of Steel Casting”, Materials Science and Engineering Department, Isfahan University of Technology, Iran, 1995.

Reports

  1. Zirconia Splat Formation and Coating Layer Build Up, CACT Annual Report 2006, GE Global Research, Jan. 2007.
  2. Zirconia Splat Formation and Coating Layer Build Up, CACT Annual Report 2005, GE Global Research, Jan. 2006.
  3. Fundamentals and Applications of Thermal Spray, CACT Annual Consortium, Sept. 2004.
  4. Performed and characterized coatings on spot welding electrodes, Huys Industries, CACT, 2003.
TOP

Presentations

  • “Effect of Substrate Temperature and Droplet Characteristics on Plasma Sprayed Zirconia Splats”, International Thermal Spray Conference, ITSC 2006, May 2006, Seattle, WA, USA.
  •  “Numerical Simulation and Experimental Evaluation of Solidification Behavior of Vacuum Plasma Sprayed Ti-6Al-4V Single Droplet”, 17 International Symposium on Plasma Chemistry, Aug. 7, 2005, Toronto, Canada.
  • “Near-net shape forming of Ti-6Al-4V by Vacuum Plasma Spray forming”, 10th meeting of the thermal spray consortium on coating formation, University of Toronto, Canada, Sep. 2004.
  • “Characterization of Vacuum Plasma Sprayed Boron Carbide”, Thermal Spray 2004: Advancing in Technology and Application, ITSC, May 2004, Osaka, Japan.
  • “Structure and Mechanical Properties of VPS Ti-6Al-4V”, International Symposium on Plasma Chemistry, ISPC, Jun. 2003, Taormina, Italy.
  • “Near-Net Shape Forming of Ti-6Al-4V alloys by Vacuum Plasma Spray Forming”, Thermal Spray 2003: Advancing the Science and Applying the Technology, ITSC, May 2003, Florida, USA.
  • “On Vacuum Plasma Spray Forming of Ti-6Al-4V”, Thermal Spray 2003: Advancing the Science and Applying the Technology, ITSC, May 2003, Florida, USA.
  • “Structure and mechanical properties of VPSF Ti-6Al-4V”, 9th meeting of the thermal spray consortium on coating formation, University of Toronto, Canada, April 2003.
  • “Near-net shape forming of VPS Ti-6Al-4V alloy”, PhD Seminar, Mechanical and Industrial Engineering, University of Toronto, Toronto, Canada, Feb. 2003.
  • “Thermal spray coatings for wear and corrosion resistance applications”, NACE International: The Corrosion Society, Chemical and Applied Chemistry, University of Toronto, Toronto, Canada, Oct. 2002.
  • “Vacuum plasma spray deposition of Ti-6Al-4V”, 2nd Annual Symposium on Thermal Spray Coatings, Canadian Ceramic Society, Niagara Falls, Ontario, Canada, Sept. 2002.
  • “Near-net shape forming of VPS Ti-6Al-4V alloy”, Qualifying Exam., Mechanical and Industrial Engineering, University of Toronto, Toronto, Canada, March. 2002.
  • “Deposition and Characterization of Diamond Films on Si Wafers and WC/Co Tool Inserts by HFCVD”, M.Sc. Seminar, Isfahan University of Technology, Iran, Feb. 1999.

 

 

TOP

Home | Resume | Publications | Contact | Links